Multiple Divider Model 8, Model 32
Model 8
The model 8 divider for 8 samples
Model 32
Dividing samples into 32 sub-samples
Purpose:
Dividing samples of grain, seed and other granular products. Accurately dividing to eight fractions.
Function description:
The sample to be divided is poured through a hopper in the top of the divider. From the hopper the sample material glides through a rotating tube which passes eight segments leading the sample to outlet tubes. The samples consists of a certain number of sub samples, the number of sub samples can be calculated by the number of rotations of the rotating tube (40 rpm). The accuracy of the dividing depends on the number of sub samples. To obtain the greatest accuracy, the time taken for dividing must never be less than 20 sec. With samples of less than 4 kg it is necessary to use an inlet hopper with a smaller outlet hole.
Typical use:
The model 8 divider is used for homogeneous ring test samples or generating calibration samples for frequent internal checks of equipment.
